Makeblock XY Plotter Robot Kit 2.0
XY Plotter Robot Kit is a drawing robot that can move a pen or other instrument to draw digital artwork on flat surface. It can also be developed into a laser engraver by adding the Laser Engraver Upgrade Pack.
Part List:
1 x Beam 0824-16
4 x Beam 0824-48
1 x Beam 0824-80
4 x Beam 0824-96
2 x Beam 0824-112
2 x Beam 0824-496
1 x Beam 0808-072
2 x Beam2424-504
2 x Bracket 3x3
5 x Plate 3x6
5 x Bracket U1_U
1 x Threaded Shaft 4x39mm
4 x Linear Motion Shaft D8X496mm
1 x Flexible coupling 4x4mm_4mm.
50 x Nut M4
26 x Headless Set Screw M3x5
10 x Countersunk Screw M3x8
36 x Socket Cap Screw M4×8
30 x Socket Cap Screw M4×14
28 x Socket Cap Screw M4×16
12 x Socket Cap Screw M4×22
18 x Socket Cap Screw M4×30
1 x HEX Screwdriver 2.5mm
1 x Cross Screwdriver 2.5mm
2 x HEX Allen Key 1.5mm
1 x Wrench 5mm&7mm
1 x K-Power 9g Micro Servo
2 x 42BYG Stepper Motor
6 x Timing Pulley18T
3 x Open-end Timing Belt (1.3m)
4 x Me Micro Switch B
1 × Micro Switch Line-35cm
1 × 2 cold pressing terminal 110 to 2510-3P 1000MM
4 × Micro Switch
4 × Foam Pad D12*6
16 x Plastic Rivet R4060
6 x Plastic Rivet R4100
20 x Plastic Ring 4x7x2mm
30 x Nylon cable ties1.9*100
2 x Stepper Motor Bracket B
3 x Belt Connector
10 x Shaft Collar 4mm
10 x Flange Bearing 4x8x3mm
1 x Linear Motion Shaft D4x80mm
1 x Linear Motion Shaft D4x512mm
2 x D Shaft 4x56mm
6 x Linear Motion Slide Unit 8mm
6 x Cuttable Linkage 3
5 x Rubber band
Features:
- This kit consists of over 60 kinds of components from Makeblock, including beams, brackets, motors, etc. Here's the picture of all the components.
- mDraw is a cross-platform open-source software developed by Makeblock.
- Benbox support gray-scale engraving, and editing figures and characters within the software.
